Autobrite Direct Final Finish (Ψιλή Αλοιφή Γυαλίσματος)

Autobrite Direct -Final Finish Fine Polishing Paste 500ml Final Finish is an excellent finishing paste with anti-hologram abrasive, offering permanent removal of holograms, fine scratches, on all types of paint (including scratch resistant coating systems). Final Finish is a highly specialized, homogeneous abrasive product and can be used with ease on all paint surfaces, offering a brilliant glossy finish every time! The NEW Autobrite Direct "Correct-it" range has been specifically designed for use on modern ceramic and scratch resistant clear coats, they have also proven to be ideal for use on harder (German) clear coats. Product Features Cut 2/10 - Gloss 10/10 Ideal for removing holograms and fine swirls Easy to use reduction formula with extended working time capabilities High gloss quality & flawless finish. Suitable for Rotary Polisher and DA Silicone free How to use Before polishing your vehicle, make sure you have thoroughly cleaned and disinfected the paint and that the surface is completely free of contaminants that could potentially damage the vehicle's paintwork. We recommend masking any sensitive areas that could be damaged by contact with the machine polish, such as grilles, badges, etc. Once you have masked the vehicle and selected your pad and polish combination, you are ready to polish. If you are using a new polishing pad, we recommend applying a larger amount of polish to "prime" the pad for use. Working on an area of approximately 15×15 inches, start buffing at a low speed to spread the polish and gradually increase the speeds until the desired machine speed is achieved. Work the polish until the haze begins to clear, this is the abrasive component of the compound breaking down and starting to polish the surface after cutting. Once the polish reaches the clear stage, it can then be removed with a soft cloth to reveal the condition of the correction. We recommend using IPA (Isopropyl Alcohol) to remove any residue and reveal the true level of correction. Once you are satisfied with the condition of your paint, a sealer or wax should be applied for protection.