Nanolex WashCoat 200ml

Nanolex WashCoat is a ceramic or other sealant enhancer designed for use after washing the vehicle to extend the life of existing coatings. WashCoat forms a chemical bond with existing ceramic coatings to revitalize, increase gloss levels and enhance hydrophobicity. Treated surfaces are easier to maintain and stay cleaner for longer. WashCoat can be used as a stand-alone product, providing a hydrophobic protective layer even if a separate sealant has not already been applied. For best results apply using a foam applicator. Alternatively, a hand pump sprayer can be used. Features & Benefits Specialized Sealant Booster for sealant or ceramics Can be used as a standalone product or as a ceramic booster Provides a hydrophobic coating to all exterior surfaces Increases gloss levels Helps with the ongoing maintenance of a car, keeping surfaces cleaner, for longer Directions for use Nanolex WashCoat can be applied to all exterior surfaces. All intended surfaces must be wet and free of contamination before use Apply WashCoat using a foamer or a pump sprayer Dilute Nanolex Washcoat only immediately before use, using 100-200ml/lit for initial application and 40-100ml/lit for maintenance. Apply the solution evenly to the surface and let it sit until the foam forms droplets on the surface. Allow WashCoat to remain on the surface for a maximum of 3 minutes before rinsing thoroughly using a pressure washer. Ensure that all residue has been properly removed before drying the car carefully, using a soft, plush towel or blower. Nanolex WashCoat is fully working until you finish rinsing. This product can be stored for up to 24 months (in a dry, temperature-stable environment) Processing temperature: 3-30°C - Avoid direct sunlight . WATCH THE VIDEO HERE!