Etari MD 750 Paint Thickness Gauge

Etari MD 750 Paint Thickness Gauge

Measure paint thickness on vehicles professionally, accurately and without damage – suitable for iron and aluminum body parts.

The Paint Thickness Gauge MD 750 allows for quick and reliable measurement of paint thickness during automotive paint testing, supported by the ability to detect galvanized parts and magnetic putty.

Thanks to its high measurement accuracy of ±2% and a measuring range of up to 3000 μm in ferrous and non-ferrous metals, this meter is ideal for professional inspectors and car dealers.

An innovative feature of the paint meter is the 3-color display, which automatically changes color when critical paint thickness values are exceeded, for intuitive use.

The screen changes color depending on the measured thickness as follows:

Less than 170 micrometers - "white"

From 170 micrometers to 350 micrometers - "blue"

From 350 micrometers to 3000 micrometers - "red"

Device advantages + Detects galvanized parts and magnetic putty + Measuring accuracy ±2% with a measuring range of up to 3000 μm in ferrous and non-ferrous metals

Wear-resistant ruby sensor

Automatic calibration allows accurate measurement of paint thickness differences without the need to calibrate the device

Automatic substrate detection

Winter resistance at operating temperatures from -15°C to +50°C

The rubber protective cover protects the device from dust and shocks

Wrist strap prevents the device from falling

Three-color screen lighting at a specific thickness with automatic activation

The screen rotates 180°

Switch between mils and micrometers

Automatic shutdown to save battery

Lightning fast: reaction time under 0.5 seconds

Acoustic signal during measurement and shutdown

Contains:

1 x Paint Thickness Gauge MD 750 2 x Calibration Discs (ferrous and non-ferrous)

1 x calibration sheet with a typical thickness of 101 μm

2 x AAA batteries

1 x Case 1 x Wrist Strap

1 x Rubber protective cover

1 x Operating instructions (German and English)

Technical Characteristics: Measurable basic materials: ferrous metals (iron, steel) and non-ferrous metals (copper, aluminum, zinc, bronze, brass)

Ferrous metal measurement range: 0 to 3000μm, 0 to 118 mils

Non-ferrous metal measuring range: 0 to 3000μm, 0 to 118 mils

Screen resolution: 0.1 mils/1μm

Reaction time: less than 0.5 seconds

Accuracy: ±4μm at 0 to 199μm ±(2%+1μm) at 200μm to 2999μm ±0.2 mils at 0 to 7.8 mils ±(2%+0.03 mils) at 7.9 mils to 118 mils

Operating temperature: -15°C to 50°C

Dimensions: 103 mm (H) x 63 mm (W) x 27 mm (D)

Weight: approx. 83 g (including batteries)